Fire Door Upgrade Varnish

Fire Retardant Varnish - for upgrading doors to 30 Minutes

Property Repair Systems - Fire Door Upgrading Free Advice - 01626 331351

 

 

 

 

 

 

   

Fire Door upgrading using our Fire Retardant Clear Varnish - for 30 Minutes of Door Fire Protection (FD20 and FD30)

First, apply the transparent, satin base coat, which is called Intumescent Varnish This is used for timber and timber product doors when being upgraded into Fire Doors. Then apply the clear finish called Flame Varnish which is available in satin or matt. Fire Varnish can be used as part of a door upgrade to FD30.

Price Match Guarantee - we will not be beaten on price. Call us on 01626 331351 for instant help..

Important - we will only supply Fire Paint or Fire Varnish for Door Upgrades if you have received our Door Upgrade Specification (free of charge - call 01626 331351) and then completed our Door Upgrade Building Inspector Permission Form. This is to avoid the risk that your Building Inspector may refuse the upgrade, which could cost you a lot of wasted time and money.

Click here to look at the product, check prices and Order in our Fire Paint Shop

If you decide to buy directly from our Fire Paint Shop we will contact you to obtain the information required to create a Specification and provide you with a Building Inspector Permission Form.


Fire Varnish finish on doors  - satin finishTesting Flame Retardant Varnish - self extinguishes.

Brushing Flame Varnish - Satin Finish. Testing - no flame produced.

* water based two pack Epoxy Intumescent coating

* no solvents

* thin coats

* low VOC, low odour finish coat


DOOR UPGRADE TO A WOODEN DOOR USING A CLEAR FINISH

Fire Door Upgrading can be achieved with clear Varnish - usually only required on one side of each door - ask your Building Inspector

Apply three coats of Intumescent Varnish - Base Coats - one 20 square metre pack will cover 4 door sides with 3 coats. This is based on coating each softwood (typically Pine) door on one side only, for indoor use, for a 35mm thick door with 10mm thick panels, 1.5 square metres area including edges.

Apply one or two coats of Flame Varnish - Finish Coats - Satin and Matt - one 20 square metre pack will cover 6 door sides with 2 coats. This is based on coating each softwood (typically Pine) door on one side only, for indoor use, for a 35mm thick door with 10mm thick panels, 1.5 square metres area including edges.

Order - Intumescent Fire Varnish, (20 square metre packs) and Flame Varnish, (20 or 80 square metre packs) plus choose a Door Essentials Kit

Click here to look at the product, check prices and Order in our Fire Paint Shop


Our unique Fire Door Upgrade Fire Retardant Clear Varnish Offer

Give us your Door dimensions and you can have by telephone, fax or E Mail:

- an instant fixed price Quotation to include a Fire Certificate of Supply, delivery and detailed Specification for your Door Upgrade needs

- a Building Inspector ready document set, with Data Sheets, for his or her approval

- free product support by telephone before, during and after application, to ensure that you meet the Fire Regulations

Don't get caught out by just buying any old Fire Paint or Fire Varnish - use our Free Service and get it right first time.

Click here to look at the product, check prices and Order in our Fire Paint Shop


What to buy as a door upgrade Fire Varnish: call us on 01626 331351

Fire Intumescent Varnish - apply 3 coats

Fire Flame Varnish Finish - apply 1 to 2 coats, over the Intumescent Varnish, to give a satin or a matt finish.

Important - we will only supply Fire Paint or Fire Varnish for Door Upgrades if you have received our Door Upgrade Specification (free of charge - call 01626 331351) and then completed our Door Upgrade Building Inspector Permission Form. This is to avoid the risk that your Building Inspector may refuse the upgrade, which could cost you a lot of wasted time and money.

Click here to look at the product, check prices and Order in our Fire Paint Shop

If you decide to buy directly from our Fire Paint Shop we will contact you to obtain the information required to create a Specification and provide you with a Building Inspector Permission Form.


Typical Coverage for Fire Door Upgrading Varnishes: click SHOP to see the details

In the smallest pack sizes:

Intumescent Varnish - 6.5 square metres per litre, 20 square metres per 3 litre pack (with added water), per coat.

Flame Varnish Finish - 10 square metres per litre, 20 square metres per 2 litre pack, per coat.

Note - an average door, if varnishing one side only, including three edges, will have an area of about 1.6 square metres.


Suitable for:

1. Fire Door conversion of Solid Doors made of Softwoods and Hardwoods

2. Interior and Exterior Fire Door and wood paneling upgrades and conversions

3. Fire Door conversion of existing doors with painted surfaces, varnished finishes, stained doors or bare, unfinished new or old wood.

4. Applying over existing clear finishes, white finishes or coloured finishes to create a Fire Door

5. Fire Doors and timber paneling for Loft Conversions, Hotels, Boarding House, Flats.

6. Fire Doors, and door upgrades to modify existing solid wood doors to 30 minutes (FD30) standard.

7. Exhibition Stand Fire Doors, Shopping Centre Kiosk Fire Doors, Night Club Bar Fire Doors, Restaurant Bar Fire Doors, Shop Fire Doors.

8. Fire Protection of Exhibition Stands and Fire Protection of Retail Kiosks.


Speak to us now for door upgrade free help and immediate pricing - Tel: 01626 331351

Next Day UK Delivery of all Fire Door upgrading Varnishes - Price Matching Offer

Click here to look at the product, check prices and Order in our Fire Paint Shop



Property Repair Systems, Unit 3, Olympus Business Park,

Kingsteignton Road, Newton Abbot, Devon TQ12 2SN

Tel:01626 331351 Fax: 01626 331143

E Mail:help@propertyrepairsystems.co.uk